5axes / universalcurasettings Goto Github PK
View Code? Open in Web Editor NEWJonas Universal Cura Settings
License: GNU Affero General Public License v3.0
Jonas Universal Cura Settings
License: GNU Affero General Public License v3.0
It would be nice to know what each configuration is adjusting so we can tweak things beyond the specific config, like when we want a small figure AND a good top layer.
Some configs may adjust up to 77 things (I think I saw that number once) to a low of 14. It would be nice to know why the difference...
After playing with UCS for a while I got to a configuration that was printing seriously ugly. Under Extrusion like crazy. There was no way to "back out" or "undo". Tried pulling in a "default" profile to reset my custom profile but it still was miss-behaving.
I switched slicers to double check it wasn't wet filament or something on the printer, and the other slicer worked fine. Went through ALL the settings AGAIN and couldn't find anything. Had this happen before without UCS and had to do a clean re-install, ie delete the WinData stuff as well and rebuild my profiles from scratch.
Need a way to get the WHOLE application back to a known state, ie a profile "RESET".
just deleting a profile doesn't seem to delete/reset everything. Some associated things in the printer and system options seem to stay, and I think somewhere in there is where my system got corrupted.
Two more configurations I would like to see
Overhangs
Surface Finish (not just ironing, external wall finishes as well...)
Hello,
I noticed that with Cura 4.x the line height is set, e.g. to 0.24 in mode prototyope. But in Cura 5.x it is not set anymore (and obviously some other values too, because in Cura 4.x 99 values were set, in Cura 5.x 36).
Is that on purpose or is the addon for Cura 5 still work in progress ?
Thanks for a hint!
Hi, I'm not a programmer or anything like that, I've always used your plugin, it's incredible, but now it's disappeared from the store. What happened? Can I install it other than through the Ultimaker Marketplace?
It's probably a long, long way off, but something I think would be a good idea is an option to specify a secondary intent that, where allowed, complements the primary intent. Like a second priority intent.
If I apply the AntiWrap settings on ABS, I see that the values change, but sometimes, I run it twice or more often, than I get settings that will never work, would be good, to have a marker, that it save the current settings, before it runs and check if the changes already applied or have changed...
The dialog always opens up on the "main" monitor and can't be moved
Movable dialog between monitors.
THE SAME AS THIS: It doesn't show any labels at all. I am using Cura 5.2.1 in Windows 10.
The buttons and comboboxes still work, of course, but I had a brief moment of confusion when I installed this and tried it for the first time.
NOT SEE IN WHITH BLACK OR WHITE THEME
My everyday printing nozzle size is a .5 on most of my printers. I don't feel like every odd number nozzle is necessary, even though would be ideal. But you should at least add .5 and .3 because they are the closest options to the most common .4
Also enjoy your settings, most applies to most printers. I have some rep rap mostly 3d printed printers that your accel and jerk settings are not ideal for, but I assume anyone building a printer like that are going to understand how to run test to find ideal settings for that
When I apply the settings for optimal support removal there are also changes made to Retraction Distance and Retraction Speed.
In my understanding such settings should only be changed if "Set standard settings" is checked.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.