GithubHelp home page GithubHelp logo

alexwangly / python-1 Goto Github PK

View Code? Open in Web Editor NEW

This project forked from kubernetes-client/python

0.0 0.0 0.0 21.13 MB

Official Python client library for kubernetes

Home Page: http://kubernetes.io/

License: Apache License 2.0

Shell 0.35% Python 99.65% Batchfile 0.01%

python-1's Introduction

Kubernetes Python Client

Build Status PyPI version codecov pypi supported versions Client Capabilities Client Support Level

Python client for the kubernetes API.

Installation

From source:

git clone --recursive https://github.com/kubernetes-client/python.git
cd python
python setup.py install

From PyPI directly:

pip install kubernetes

Examples

list all pods:

from kubernetes import client, config

# Configs can be set in Configuration class directly or using helper utility
config.load_kube_config()

v1 = client.CoreV1Api()
print("Listing pods with their IPs:")
ret = v1.list_pod_for_all_namespaces(watch=False)
for i in ret.items:
    print("%s\t%s\t%s" % (i.status.pod_ip, i.metadata.namespace, i.metadata.name))

watch on namespace object:

from kubernetes import client, config, watch

# Configs can be set in Configuration class directly or using helper utility
config.load_kube_config()

v1 = client.CoreV1Api()
count = 10
w = watch.Watch()
for event in w.stream(v1.list_namespace, _request_timeout=60):
    print("Event: %s %s" % (event['type'], event['object'].metadata.name))
    count -= 1
    if not count:
        w.stop()

print("Ended.")

More examples can be found in examples folder. To run examples, run this command:

python -m examples.example1

(replace example1 with one of the filenames in the examples folder)

Documentation

All APIs and Models' documentation can be found at the Generated client's README file

Compatibility

client-python follows semver, so until the major version of client-python gets increased, your code will continue to work with explicitly supported versions of Kubernetes clusters.

Compatibility matrix of supported client versions

  • client 9.y.z: Kubernetes 1.12 or below (+-), Kubernetes 1.13 (✓), Kubernetes 1.14 or above (+-)
  • client 10.y.z: Kubernetes 1.13 or below (+-), Kubernetes 1.14 (✓), Kubernetes 1.14 or above (+-)
  • client 11.y.z: Kubernetes 1.14 or below (+-), Kubernetes 1.15 (✓), Kubernetes 1.16 or above (+-)
  • client 12.y.z: Kubernetes 1.15 or below (+-), Kubernetes 1.16 (✓), Kubernetes 1.17 or above (+-)
  • client 17.y.z: Kubernetes 1.16 or below (+-), Kubernetes 1.17 (✓), Kubernetes 1.18 or above (+-)
  • client 18.y.z: Kubernetes 1.17 or below (+-), Kubernetes 1.18 (✓), Kubernetes 1.19 or above (+-)
  • client 19.y.z: Kubernetes 1.18 or below (+-), Kubernetes 1.19 (✓), Kubernetes 1.20 or above (+-)
  • client 20.y.z: Kubernetes 1.19 or below (+-), Kubernetes 1.20 (✓), Kubernetes 1.21 or above (+-)
  • client 21.y.z: Kubernetes 1.20 or below (+-), Kubernetes 1.21 (✓), Kubernetes 1.22 or above (+-)
  • client 22.y.z: Kubernetes 1.21 or below (+-), Kubernetes 1.22 (✓), Kubernetes 1.23 or above (+-)
  • client 23.y.z: Kubernetes 1.22 or below (+-), Kubernetes 1.23 (✓), Kubernetes 1.24 or above (+-)

See here for an explanation of why there is no v13-v16 release.

Key:

  • Exactly the same features / API objects in both client-python and the Kubernetes version.
  • + client-python has features or API objects that may not be present in the Kubernetes cluster, either due to that client-python has additional new API, or that the server has removed old API. However, everything they have in common (i.e., most APIs) will work. Please note that alpha APIs may vanish or change significantly in a single release.
  • - The Kubernetes cluster has features the client-python library can't use, either due to the server has additional new API, or that client-python has removed old API. However, everything they share in common (i.e., most APIs) will work.

See the CHANGELOG for a detailed description of changes between client-python versions.

Client version Canonical source for OpenAPI spec Maintenance status
5.0 Alpha/Beta Kubernetes main repo, 1.9 branch
5.0 Kubernetes main repo, 1.9 branch
6.0 Alpha/Beta Kubernetes main repo, 1.10 branch
6.0 Kubernetes main repo, 1.10 branch
7.0 Alpha/Beta Kubernetes main repo, 1.11 branch
7.0 Kubernetes main repo, 1.11 branch
8.0 Alpha/Beta Kubernetes main repo, 1.12 branch
8.0 Kubernetes main repo, 1.12 branch
9.0 Alpha/Beta Kubernetes main repo, 1.13 branch
9.0 Kubernetes main repo, 1.13 branch
10.0 Alpha/Beta Kubernetes main repo, 1.14 branch
10.0 Kubernetes main repo, 1.14 branch
11.0 Alpha/Beta Kubernetes main repo, 1.15 branch
11.0 Kubernetes main repo, 1.15 branch
12.0 Alpha/Beta Kubernetes main repo, 1.16 branch
12.0 Kubernetes main repo, 1.16 branch
17.0 Alpha/Beta Kubernetes main repo, 1.17 branch
17.0 Kubernetes main repo, 1.17 branch
18.0 Alpha/Beta Kubernetes main repo, 1.18 branch
18.0 Kubernetes main repo, 1.18 branch
19.0 Alpha/Beta Kubernetes main repo, 1.19 branch
19.0 Kubernetes main repo, 1.19 branch
20.0 Alpha/Beta Kubernetes main repo, 1.20 branch
20.0 Kubernetes main repo, 1.20 branch
21.0 Alpha/Beta Kubernetes main repo, 1.21 branch
21.0 Kubernetes main repo, 1.21 branch
22.0 Alpha/Beta Kubernetes main repo, 1.22 branch
22.0 Kubernetes main repo, 1.22 branch
23.0 Alpha/Beta Kubernetes main repo, 1.23 branch
23.0 Kubernetes main repo, 1.23 branch

See here for an explanation of why there is no v13-v16 release.

Key:

  • Changes in main Kubernetes repo are manually (should be automated) published to client-python when they are available.
  • No longer maintained; please upgrade.

Kubernetes supports three minor releases at a time. "Support" means we expect users to be running that version in production, though we may not port fixes back before the latest minor version. For example, when v1.3 comes out, v1.0 will no longer be supported. In consistent with Kubernetes support policy, we expect to support three GA major releases (corresponding to three Kubernetes minor releases) at a time.

Note: There would be no maintenance for alpha/beta releases except the latest one.

Exception to the above support rule: Since we are running behind on releases, we will support Alpha/Beta releases for a greater number of clients until we catch up with the upstream version.

Homogenizing the Kubernetes Python Client versions

The client releases v12 and before following a versioning schema where the major version was 4 integer positions behind the Kubernetes minor on which the client is based on. For example, v12.0.0 is based on Kubernetes v1.16, v11.0.0 is based on Kubernetes v1.15 and so on.

This created a lot of confusion tracking two different version numbers for each client release. It was decided to homogenize the version scheme starting from the Kubernetes Python client based on Kubernetes v1.17. The versioning scheme of the client from this release would be vY.Z.P where Y and Z are the Kubernetes minor and patch release numbers from Kubernets v1.Y.Z and P is the client specific patch release numbers to accommodate changes and fixes done specifically to the client. For more details, refer this issue.

Community, Support, Discussion

If you have any problem on using the package or any suggestions, please start with reaching the Kubernetes clients slack channel, or filing an issue to let us know. You can also reach the maintainers of this project at SIG API Machinery, where this project falls under.

Code of Conduct

Participation in the Kubernetes community is governed by the CNCF Code of Conduct.

Troubleshooting

SSLError on macOS

If you get an SSLError, you likely need to update your version of python. The version that ships with macOS may not be supported.

Install the latest version of python with brew:

brew install python

Once installed, you can query the version of OpenSSL like so:

python -c "import ssl; print (ssl.OPENSSL_VERSION)"

You'll need a version with OpenSSL version 1.0.0 or later.

Hostname doesn't match

If you get an ssl.CertificateError complaining about hostname match, your installed packages does not meet version requirements. Specifically check ipaddress and urllib3 package versions to make sure they met requirements in requirements.txt file.

Why Exec/Attach calls doesn't work

Starting from 4.0 release, we do not support directly calling exec or attach calls. you should use stream module to call them. so instead of resp = api.connect_get_namespaced_pod_exec(name, ... you should call resp = stream(api.connect_get_namespaced_pod_exec, name, ....

Using Stream will overwrite the requests protocol in core_v1_api.CoreV1Api() This will cause a failure in non-exec/attach calls. If you reuse your api client object, you will need to recreate it between api calls that use stream and other api calls.

See more at exec example.

python-1's People

Contributors

bpicolo avatar cclauss avatar dependabot[bot] avatar dims avatar djangopeng avatar djkonro avatar fabianvf avatar fooka03 avatar goddenrich avatar iamneha avatar iciclespider avatar invictus17 avatar itaru2622 avatar jamesgetx avatar jonasdlindner avatar k8s-ci-robot avatar mbohlool avatar micw523 avatar mitar avatar oz123 avatar palnabarun avatar pokoli avatar prabha1331 avatar priyankasaggu11929 avatar roycaihw avatar ryphon avatar spiffxp avatar tomplus avatar vishnu667 avatar yliaog avatar

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.