andrei7c4 / weatherdisplay Goto Github PK

Hey,
is it possible to add ä, ö, ü and ß to arial56? -> For example German weather discription in Chart 2 "Mäßiger Regen“ is displayed as "Miger Regen".
The problem is that the according chars are not defined in arial56.c, right?

So, how is the .fnt file with the png converted to the .c file?

Thank you in advance!
Samuel

Hi! Really great project.

I was wondering if you know if the functions on the 7.5 inch would also work with the 10.5 inch eink display?

Obviously the resolution is different, so I wouldn't assume it would magically work as a drop in replacement.

Just curious if you looked into that.

Project looks awesome, but the display used is not available anymore. Any ideas?

sorry to open an issue, i do not know how to contact you otherwise.
Can you build a weatherdisplay for me - just for me personally - one unit.
how much will it cost?

Hello,

I have compiled the project according to your instructions on Linux.
Then I have these imported and the settings made for WLAN etc.

But unfortunately the whole thing is always and I can enter nothing more and nothing happens.

lll▒▒r▒l▒▒mode : sta(5c:cf:7f:f8:6d:5e)
add if0
scandone
state: 0 -> 2 (b0)
state: 2 -> 3 (0)
state: 3 -> 5 (10)
add 0
aid 1
cnt
connected with homebox, channel 6
ip:192.168.0.121,mask:255.255.255.0,gw:192.168.0.100
state: 5 -> 0 (0)
rm 0
del if0
usl

This issue now comes at the start and then nothing happens.

Can you help me, what could I have done wrong?

Best Regards

Martin

I am trying to build weatherdisplay using the esp-open-sdk toolchain as described in your readme.
The make and flash process are carried out successfully, however the esp won't leave the boot-mode at reset with the following error message (displayed when connecting to the serial port):

ets Jan 8 2013, rst cause:2, boot mode: (3,6)
[...]
valid config found
Fatal exception 3(LoadStoreErrorCause):
epc1=0x4000deed, epc2=0x00000000, epc3= 0x00000000, excvaddr=0x40000014

I am using the NodeMCUV3. I have tried with external powering and multiple nodemcu boards, however the esp won't leave boot mode. Any ideas on what I am doing wrong?

I am trying to build weatherdisplay using the esp-open-sdk toolchain as described in your readme. I just set DebugEn= TRUE;.
The make and flash process are carried out successfully, however the esp won't leave the boot-mode at reset with the following error message (displayed when connecting to the serial port):

valid retain found
valid config found
Built on Apr 13 2020 17:12:07
SDK version 2.2.0-dev(9422289)
attempts 7, fails 6, retry 0
appState 1
mode : sta(ec:fa:bc:5fab8d)
add if0
timeoutTmrCb, appState 1
appState 10

ets Jan 8 2013,rst cause:2, boot mode:(3,6)

load 0x40100000, len 32124, room 16
tail 12
chksum 0xcc
ho 0 tail 12 room 4
load 0x3ffe8000, len 2688, room 12
tail 4
chksum 0xd0
load 0x3ffe8a80, len 3328, room 4
tail 12
chksum 0x78
csum 0x78

Hi, i have flashed esp8266 and Epaper Display display does not work.
there is an issue:
( Serial monitor)

onTcpDataReceived 510
parseHttpReply 510
HTTP/1.1 401 Unauthorized
Server: openresty
Content-Type: application/json; charset=utf-8
Content-Length: 107
Connection: keep-alive
X-Cache-Key: /data/2.5/forecast/daily?APPID=(myAPI Codexxxxxxx)&cnt=3&id=2939778&lang=en&mode=json
Access-Control-Allow-Origin: *
Access-Control-Allow-Credentials: true
Access-Control-Allow-Methods: GET, POST

{"cod":401, "message": "Invalid API key. Please see http://openweathermap.org/faq#error401 for more info."}

parse forecastDaily failed <------

In Openweathermap free account ist not include "16 days/daily forecast API"
Startup Account 40 USD / month ????

Hello Andrei,

I would like to expand your Weather Display. For that I would need your help, mainly for the software. I have designed a board with the components from your git description. In addition, I added a 868 Mhz transceiver. I would like to connect the transceiver with a complete radio transmitter. I found something ready on the internet https://nathan.chantrell.net/tinytx-wireless-sensor/ I would like to fade in the radio sensors as an outside temperature sensor.

If you are interested I would send you more details by e-mail as well as a few pictures of my setup so far. Furthermore, I would like to expand the board so that the new version of the e-paper display works. http://www.pervasivedisplays.com/products/740i

I would also send you a board with wireless sensor so you can customize the software... Is better for you and for me :-)

I look forward to hearing from you!

best regards

Martin