Compare And Shuffle Heterozygosity using BED and VCF files
This tool will help compare heterozygosity density and homozygosity runs along contigs inside and outside regions defined by a BED file.
$ python shuffle.py [-h] {shuffle,plot-dis,plot-comp,compare} ...
Shuffles SNPs and outputs homozygosity runs along contigs.
positional arguments:
{shuffle,plot-dis,plot-comp,compare}
shuffle Shuffles SNPs and output closest distance of observed and shuffled data.
plot-dis Plot shuffled vs observed distributions based on shuffle command results.
plot-comp Compare heterozygosity of regions in and out of a bed file.
compare Compare heterozygosity of regions in and out of a bed file.
optional arguments:
-h, --help show this help message and exit
The shuffler will shuffle SNPs along contigs based on a .BED file. The variants inside regions defined by the .BED file will be shuffled in the span of this region (i.e. a CDS). The variants outside of the regions will be shuffled along the whole length of the contig not spanned by the regions. The shuffled variants distribution can be compared with the observed distribution to check whether CDS or other regions are denser or less dense in variants.
usage: shuffle.py shuffle [-h] [-s SAMPLE] [-lc LOW_COVERAGE]
[-hc HIGH_COVERAGE] [-mq MIN_QUAL] [-p [PLOT]]
[-cs CONTIG_SIZE]
VCF FASTA BED OUT
positional arguments:
VCF <STRING>
A path to a the short variants calls (vcf file).
FASTA <STRING>
A path to the reference genome (fasta file).
BED <STRING>
A path to the regions locations (sorted and merged bed file).
OUT <STRING>
An output directory path for the out files.
optional arguments:
-h, --help show this help message and exit
-s SAMPLE, --sample SAMPLE <STRING>
Sample to use for short variants positions. Default: ['ancestor']
-lc LOW_COVERAGE, --low-coverage LOW_COVERAGE <INT>
Minimum coverage required to consider a good variant. Default: [None]
-hc HIGH_COVERAGE, --high-coverage HIGH_COVERAGE <INT>
Maximum coverage threshold to consider a good variant. Default: [None]
-mq MIN_QUAL, --min-qual MIN_QUAL <INT>
Minimum QUAL required to consider a good variant. Default: [None]
-p [PLOT], --plot [PLOT]
Output distribution plots. Default: True
-cs CONTIG_SIZE, --contig-size CONTIG_SIZE <INT>
Minimum size of a contig to plot. Default: [500000]bp
Example output: <sample>_DataFrame.csv
| Column | Name | Explanation |
|---|---|---|
| 1 | index | |
| 2 | POS | position along the contig |
| 3 | SNP | python boolean determining if site is a SNP or not |
| 4 | REGIONS | python boolean determining if site was in a .BED defined region or not |
| 5 | shuffledSNP | python boolean determining if site became a SNP after shuffling |
| 6 | CHROM | name of the contig |
,POS,SNP,REGIONS,shuffledSNP,CHROM
0,0,False,False,False,Chrom_3
1,1,False,False,False,Chrom_3
2,2,False,False,False,Chrom_3
3,3,False,False,False,Chrom_3
4,4,False,False,False,Chrom_3
5,5,False,False,False,Chrom_3
6,6,False,False,False,Chrom_3
7,7,False,False,False,Chrom_3
8,8,False,False,False,Chrom_3
...
Example graphics output: simulated data with genes under selection and large homozygous regions at extremities of contigs. The expected curve (orange) shows that heterozygosity should indeed be higher at telomeres while accounting for lower overall %heterozygosity in genes.
Takes .CSV output of shuffle.py shuffle and outputs graphs. See output of the shuffle module.
usage: shuffle.py plot-dis [-h] [-o OUTPUT] [-co COLOR_OBSERVED]
[-cs COLOR_SHUFFLED] [-wd WIDTH] [-hg HEIGHT]
[-s SIZE] [-b BINS]
CSV FASTA
positional arguments:
CSV <STRING> A path to a the output of the shuffle command (csv file).
FASTA <STRING> A path to the reference genome (fasta file).
optional arguments:
-h, --help show this help message and exit
-o OUTPUT, --output OUTPUT <STRING>
Directory name to output. Default: path/to/cur_dir/['plots']
-co COLOR_OBSERVED, --color-observed COLOR_OBSERVED <STRING>
A matplotlib valid color for the observed distribution. Default: ['dodgerblue']
-cs COLOR_SHUFFLED, --color-shuffled COLOR_SHUFFLED <STRING>
A matplotlib valid color for the shuffled distribution. Default: ['orange']
-wd WIDTH, --width WIDTH <INT>
Width of plot to output. Default: [14]
-hg HEIGHT, --height HEIGHT <INT>
Height of plot to output. Default: [7]
-s SIZE, --size SIZE <INT>
Minimum size of a contig to plot. Default: [500000]bp
-b BINS, --bins BINS <INT>
Number of bins (windows) to make on each chromosome. Default: [501]bp
Takes a .VCF, a .FASTA and a .BED file and compares heterozygosity distribution inside and outside defined regions. This helps verifying that some regions have lower or higher densities of variants.
usage: shuffle.py compare [-h] [-s SAMPLE] [-o OUTPUT] [-ci COLOR_IN]
[-co COLOR_OUT] [-wd WIDTH] [-hg HEIGHT]
[-cs CONTIG_SIZE] [-rs REGION_SIZE] [-MS MAX_SIZE]
[-ms MIN_SIZE] [-bn BIN_NUMBER] [-MH MAX_HET]
[-mh MIN_HET] [-bhn BIN_HET_NUMBER]
VCF FASTA BED
positional arguments:
VCF <STRING>
A path to a the short variants calls (vcf file).
FASTA <STRING>
A path to the reference genome (fasta file).
BED <STRING>
A path to the regions locations (sorted and merged bed file).
optional arguments:
-h, --help show this help message and exit
-s SAMPLE, --sample SAMPLE <STRING>
Sample name to read in VCF. Default: ['ancestor']
-o OUTPUT, --output OUTPUT <STRING>
Directory name to output. Default: path/to/cur_dir/['plots']
-ci COLOR_IN, --color-in COLOR_IN <STRING>
A matplotlib valid color for the inside distribution. Default: ['dodgerblue']
-co COLOR_OUT, --color-out COLOR_OUT <STRING>
A matplotlib valid color for the outside distribution. Default: ['orange']
-wd WIDTH, --width WIDTH <INT>
Width of plot to output. Default: [14]
-hg HEIGHT, --height HEIGHT <INT>
Height of plot to output. Default: [7]
-cs CONTIG_SIZE, --contig-size CONTIG_SIZE <INT>
Minimum size of a contig to plot. Default: [500000]bp
-rs REGION_SIZE, --region-size REGION_SIZE <INT>
Minimum size of a region to be considered in output plots. Default: [200]bp
-MS MAX_SIZE, --max-size MAX_SIZE <INT>
Maximum size of a region to plot the histogram (regions in range [ms, MS]). Default: [500000]
-ms MIN_SIZE, --min-size MIN_SIZE <INT>
Minimum size of a region to plot the histogram (regions in range [ms, MS]). Default: [200]
-bn BIN_NUMBER, --bin-number BIN_NUMBER <INT>
Number of bins in histogram in range [ms, MS]. Default: [100]
-MH MAX_HET, --max-het MAX_HET <INT>
Maximum heterozygosity range of a region to plot the histogram (in range [mh, MH]). Default: [10]
-mh MIN_HET, --min-het MIN_HET <INT>
Minimum heterozygosity range of a region to plot the histogram (in range [mh, MH]). Default: [0]
-bhn BIN_HET_NUMBER, --bin-het-number BIN_HET_NUMBER <INT>
Number of bins in histogram in range [mh, MH]. Default: [100]
Example output: <sample>_Comparison_DataFrame.csv
| Column | Name | Explanation |
|---|---|---|
| 1 | REGIONS | index |
| 2 | POS | length of the region |
| 3 | REGIONS | python boolean determining if the region is inside or not |
| 4 | SNP | integer number of variants found in this region |
| 5 | CHROM | name of the contig |
REGIONS,POS,REGIONS,SNP,CHROM
1,4391,False,38,Chrom_3
2,1012,True,18,Chrom_3
3,2802,False,31,Chrom_3
4,1081,True,43,Chrom_3
5,3863,False,149,Chrom_3
6,2861,True,56,Chrom_3
7,3356,False,109,Chrom_3
8,14533,True,0,Chrom_3
9,11302,False,62,Chrom_3
Example graphics output: histogram of heterozygosity inside and outside defined regions
Takes the output of shuffle.py compare and a .FASTA reference to output graphs as shown above.
usage: shuffle.py plot-comp [-h] [-s SAMPLE] [-o OUTPUT] [-ci COLOR_IN]
[-co COLOR_OUT] [-wd WIDTH] [-hg HEIGHT]
[-cs CONTIG_SIZE] [-rs REGION_SIZE] [-MS MAX_SIZE]
[-ms MIN_SIZE] [-bn BIN_NUMBER] [-MH MAX_HET]
[-mh MIN_HET] [-bhn BIN_HET_NUMBER]
CSV FASTA
positional arguments:
CSV <STRING> A path to a the short variants calls (vcf
file).
FASTA <STRING> A path to the reference genome (fasta file).
optional arguments:
-h, --help show this help message and exit
-s SAMPLE, --sample SAMPLE <STRING>
Sample name (only for output file names). Default: ['unknown']
-o OUTPUT, --output OUTPUT <STRING>
Directory name to output. Default: path/to/cur_dir/['compare_plots']
-ci COLOR_IN, --color-in COLOR_IN <STRING>
A matplotlib valid color for the inside distribution. Default: ['dodgerblue']
-co COLOR_OUT, --color-out COLOR_OUT <STRING>
A matplotlib valid color for the outside distribution. Default: ['orange']
-wd WIDTH, --width WIDTH <INT>
Width of plot to output. Default: [14]
-hg HEIGHT, --height HEIGHT <INT>
Height of plot to output. Default: [7]
-cs CONTIG_SIZE, --contig-size CONTIG_SIZE <INT>
Minimum size of a contig to plot. Default: [500000]bp
-rs REGION_SIZE, --region-size REGION_SIZE <INT>
Minimum size of a region to be considered in output plots. Default: [200]bp
-MS MAX_SIZE, --max-size MAX_SIZE <INT>
Maximum size of a region to plot the histogram (regions in range [ms, MS]). Default: [500000]
-ms MIN_SIZE, --min-size MIN_SIZE <INT>
Minimum size of a region to plot the histogram (regions in range [ms, MS]). Default: [200]
-bn BIN_NUMBER, --bin-number BIN_NUMBER <INT>
Number of bins in histogram in range [ms, MS]. Default: [100]
-MH MAX_HET, --max-het MAX_HET <INT>
Maximum heterozygosity range of a region to plot the histogram (in range [mh, MH]). Default: [10]
-mh MIN_HET, --min-het MIN_HET <INT>
Minimum heterozygosity range of a region to plot the histogram (in range [mh, MH]). Default: [0]
-bhn BIN_HET_NUMBER, --bin-het-number BIN_HET_NUMBER <INT>
Number of bins in histogram in range [mh, MH]. Default: [100]
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent