boschsensortec / bosch-bme68x-library Goto Github PK

Hello,

I am running a new BME688 device with an Adafruit ESP32 Feather Board. I have imported all necessary zip files into the Arduino IDE and run the basic.ino file; however, I am experiencing an issue.

My output section ends with this:

I understand this isn't necessarily an error, but I'm first wondering if I can evade this message, and second, curious if it relates to what appears on my serial monitor.

My serial Monitor returns " BME68X error code : -2 " which is a communication failure, according to the Bosch API.

Any help would be appreciated.

Thank you in advance,
Joe

Hello!
Is there any feature planned that the BME688 AI function can be used with an adafruit microcontroller, preferably with Circuit and/or Micropython?

I'd love to use the bme688 with my devices.

Hello
How can I get the index for air quality(IAQ)

Hi, I am using bme688 from Adafruit and Heltec Esp32S3 board on Arduino 2.3.2 with esp32 3.0.1
Testing with forced_mode688.ino after some working time I get wrong values with 80 status value. Readings keep wrong values till mcu is reset.

Debug

14:43:44.395 -> TimeStamp(ms), Temperature(deg C), Pressure(Pa), Humidity(%), Gas resistance(ohm), Status
14:45:24.833 -> 100540, 24.77, 98526.91, 50.67, 41775.46, B0
14:45:26.878 -> 102587, 24.77, 98527.97, 50.66, 42356.05, B0
14:45:28.902 -> 104634, 33.15, 77386.77, 100.00, 6400000.00, 80
14:45:30.943 -> 106681, 33.15, 77386.77, 100.00, 6400000.00, 80