huz123 / bricked Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/bricked
License: Other
Automatically exported from code.google.com/p/bricked
License: Other
What steps will reproduce the problem?
1. By having multiple things running at once perhaps? Was taking photos when a
call came in, answered the phone, hung up the phone and pressed back to go back
to the home screen from the camera app. Phone froze after that.
What is the expected output? What do you see instead?
Just hung, and pressing the lock screen button will switch off the screen, but
unable to turn it back on again using the same button
What version of the product are you using? On what operating system?
Bricked-1.35 #393, InsertCoin 2.2.5 (not the SSE, the old old 2.2.5)
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 22 Oct 2011 at 12:33
Attachments:
What steps will reproduce the problem?
1.Periodically, there are problems with the display.
It turns off by itself and is not included. We have to take out the battery.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
HTC Sensation Android 2.3.4 stok 1.45.401.2
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 30 Sep 2011 at 10:12
What steps will reproduce the problem?
1. wifi is not working
2. camera is not working
3.
What is the expected output? What do you see instead?
--
What version of the product are you using? On what operating system?
bricket 1.3
Please provide any additional information below.
--
Original issue reported on code.google.com by [email protected]
on 13 Oct 2011 at 9:59
What steps will reproduce the problem?
1. make ARCH=arm
2.
3.
What is the expected output? What do you see instead?
drivers/cpufreq/cpufreq.c: In function 'cpufreq_add_dev':
drivers/cpufreq/cpufreq.c:1078: error: 'cp' may be used uninitialized in this
function
What version of the product are you using? On what operating system?
ubuntu 10.04
Please provide any additional information below.
nothing.
Original issue reported on code.google.com by [email protected]
on 22 Sep 2011 at 11:20
What steps will reproduce the problem?
1. Verbindung mit einem 802.1x EAP (PEAP) Netzwerk mit Zertifikat
2.
3.
What is the expected output? What do you see instead?
Ich habe das Sensation so konfiguriert, dass sich die WLAN-Verbindung nicht
trennt (Erweiterte WLAN-Einstellungen -> Standby-Richtlinie "Niemals"; seit
Sense 3.5 Energie-Modus "Hohe Leistungsfähigkeit"). Trotzdem kommt es im
Uninetz regelmäßig zu WLAN Verbindungsabbrüchen, die Wiederverbindung muss
dann in 4 von 5 Fällen manuell erfolgen, da ein automatisches Einwählen trotz
gesicherter Verbindungsdaten nicht erfolgt.
Das Netzwerk ist ein 802.1x EAP (PEAP) Netzwerk, ich habe also meine
individuellen Zugangsdaten für das Netzwerk. Gleichzeitig habe ich ein
Zertifikat auf meinem Handy installiert (Deutsche Telekom Root CA2), dieses ist
im "Anmeldeinformationsspeicher" gesichert. Ich glaube, dass dieser
"Anmeldeinformationsspeicher" direkt mit dem Problem zusammenhängt (allerdings
wirklich nur eine Vermutung meinerseits). Unter Einstellungen -> Sicherheit ->
"Sichere Anmeldeinformationen verwenden" gibt es ja die Möglichkeit, diesen zu
deaktivieren, dann ist eine Verbindung mit dem Netzwerk allerdings nicht
möglich (klicke ich das Netzwerk an, muss ich erst wieder das Passwort zum
Anmeldeinformationsspeicher eingeben, damit wird er auch wieder aktiviert. Die
Verbindungsdaten bzw. das Zertifikat sind also irgendwie "in" diesem Speicher
gesichert).
What version of the product are you using? On what operating system?
InsertCoin 3.1.7, Bricked v1.2, allerdings besteht das Problem schon seit ich
das Handy gekauft habe, bei jeder ROM und jedem Kernel (jeder RUU).
Hier ist eine genaue Anleitung der Uni, wie man sich zu dem Netzwerk verbinden
soll:
http://www.itmc.tu-dortmund.de/de/dienste/netz-und-server-dienste/netzwerk-zugae
nge/1536-wlan-anleitung-wpa2-fuer-android-22.html
Hier noch eine Anleitung zu dem Zertifikat:
http://www.itmc.tu-dortmund.de/de/dienste/netz-und-server-dienste/netzwerk-zugae
nge/1608-wlan-anleitung-import-eines-zertifikats-unter-android-22.html
Please provide any additional information below.
Ich schreibe mal ausnahmsweise auf Deutsch, weil ich nicht glaube, dass ich die
Problembeschreibung auf Englisch nicht ansatzweise so gut hingekriegt hätte.
Ich weiß, dass es sich hierbei nicht um ein Kernel-Problem handelt, allerdings
könnte ich mir vorstellen, dass es vielleicht auf Kernel-Ebene zu lösen ist.
Wenn du irgendwelche Logs oder weitere Informationen von mir brauchst, sag
einfach bescheid, ich bin immer mal wieder an der Uni ;)
Original issue reported on code.google.com by [email protected]
on 7 Oct 2011 at 7:17
What steps will reproduce the problem?
1. Using the phone
2. Problem does not occur every time
3.
What is the expected output? What do you see instead?
I had the phone at the wall charger, it was running normally. After some time I
wanted to check charging state, pressed the power button, nothing happened. I
put the wall charger out, the orange LED was still on and didn't switch off
until I put the battery out. After that I put it back in, connected the phone
to USB and created the log instantly.
What version of the product are you using? On what operating system?
InsertCoin 3.1.7 with Bricked v1.2, no OC apps, all standard
Please provide any additional information below.
When I found the phone not reacting to any action, the charging LED was orange.
It stayed orange till I put the battery out, even after some minutes. When I
put the battery back in and connected via USB to the PC, it instantly switched
from orange to green. Logs directly after starting (back at homescreen).
Original issue reported on code.google.com by [email protected]
on 8 Oct 2011 at 3:00
Attachments:
What steps will reproduce the problem?
1.I try to flash it but it doesn't work. I have clockwork, s-off, de branded,
everything. HELP
Please provide any additional information below.
I have Android Revolution hd 3.6.2
1.5 ghz dual core
Original issue reported on code.google.com by [email protected]
on 13 Oct 2011 at 8:49
What steps will reproduce the problem?
1.Chased a new kernel Bricked V1.2 finale
In tests as well as v0.91, but the bugs are. Of course much smaller, but still
once in a quick restart of the body,
black screen again, and why it has become more heated, though should not (as
described in the infe)
When tests showed almost the same result as v0.91 but the temperature is below
body behind tpovysilas, the widget has shown
that increased from 33C to 40C!
Not pleased with me, it's back and went back to v0.91
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
HTC Sensation Android 2.3.4 V 1.45.401.2
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 4 Oct 2011 at 7:40
What steps will reproduce the problem?
1.flash senseay rom
2.flash your sense v1.2 kernel
3.let boot and setup(or skip)
4. Open camera, click done, stair at black screen :-(
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
It breaks the camera on revolution rom as well?
Original issue reported on code.google.com by [email protected]
on 15 Oct 2011 at 3:09
What steps will reproduce the problem?
1.
2.
3.
Hi show
the attached ksmg is not from the problem itself
The black screen happened but the ksmg file is empty
I have attached the last ksmg file
sorry
dingolino
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 7 Nov 2011 at 8:38
Attachments:
Linux localhost 2.6.35.14-Bricked-v1.0-ondmnd-1536-192.show-p1984 #181 SMP
PREEMPT Thu Sep 29 13:27:24 CEST 2011 armv7l GNU/Linux
Log Attached
Original issue reported on code.google.com by [email protected]
on 29 Sep 2011 at 4:21
Attachments:
What steps will reproduce the problem?
1.Global
2.
3.
What is the expected output? What do you see instead?
'no service'
What version of the product are you using? On what operating system?
I have the sensation XE (same as sensation but clocks at 1.5) GSM so not the 4G
Please provide any additional information below.
running tripNmiui latest with his lastes kernel which clocks at 1.4 max.
Flashed yours to get more speed...
Original issue reported on code.google.com by [email protected]
on 15 Oct 2011 at 1:28
What steps will reproduce the problem?
1.Open camera (http://forum.xda-developers.com/showthread.php?t=1188310) and
then just closed it without taking a picture.
What is the expected output? What do you see instead?
Black Screen Of Death
What version of the product are you using? On what operating system?
InserCoin 3.3.9 with camera fix for Bricked Kernel v1.4
Please provide any additional information below.
I dont know if its a camera.apk issue or a kernel issue. Also it happened just
once so far. Will report later if it happens again.
Thank you.
Original issue reported on code.google.com by [email protected]
on 25 Oct 2011 at 10:26
Attachments:
When playing back AVI files using MoboPlayer (V1.2.155 Universal) the play back
just stops as if you had pressed stop, except it forgets where it got up to so
it looks like an abnormal exit. The point where it stops seems random and not
repeatable. CPU temperature seems OK (as measured by hand inside case - ie
just warm).
The app continues to run in the browser/video selection screen after the stops
and there are no FCs.
Problem did NOT occur on Stock HTC rom.
Not sure whether this is a MoboPlayer or InsertCoin or Kernel or combination
issue .
Using InsertCoin 2.2.5SSE with 0.4 then updated to 0.5.
Note: haven't had any other problems with the rom combo.
Original issue reported on code.google.com by [email protected]
on 17 Sep 2011 at 10:43
What steps will reproduce the problem?
1.The 0.91 Kernel
2.And the Android Revolution HD 3.6.2
3.
What is the expected output? What do you see instead?
Just the black screen.
What version of the product are you using? On what operating system?
0.91 and Android Revolution 3.6.2 with 2.3.4 Anroid
Please provide any additional information below.
This is just the black screen bug.
Original issue reported on code.google.com by [email protected]
on 21 Oct 2011 at 8:12
Attachments:
What steps will reproduce the problem?
1. Charging via AC (did not try USB yet)
2.
3.
What is the expected output? What do you see instead?
I expect the phone charging constantly with ~1000mA when connected to AC (maybe
~800, i don't know). But first it stays at roundabout ~600-700mA, gets lower
and lower and fixes at 100mA then. You can see battery_history.txt and three
screens attached.
What version of the product are you using? On what operating system?
InsertCoin 3.1.7 with Bricked 1.2 (#5)
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 6 Oct 2011 at 5:08
Attachments:
What steps will reproduce the problem?
1. Open camera app. Choose photo mode.
2. Take a shot.
3. Camera app freezing.
What version of the product are you using? On what operating system?
1.4 preview from Twitter with IC Rom v3.3.1.
Additional
No probs in Video mode.
Original issue reported on code.google.com by [email protected]
on 17 Oct 2011 at 6:19
What steps will reproduce the problem?
1. Enable Wi-Fi Tethering
2.
3.
What is the expected output? What do you see instead?
AP Tethering should be "Enabled", it shows "Error" instead
What version of the product are you using? On what operating system?
HTC Sensation 4G, Hypersensation CM7.1, 0.8F
Please provide any additional information below.
Wi-Fi Tethering does not work with this Kernel, but it does work with every
other kernel I flash with this ROM.
Original issue reported on code.google.com by [email protected]
on 12 Nov 2011 at 4:56
What steps will reproduce the problem?
1. Updated Barcode scanner
2. Launched the app
3. Exit by back button
What is the expected output? What do you see instead?
Just GUI of Barcode scanner
What version of the product are you using? On what operating system?
IC 3.4.0
2.6.35.14-Bricked-v1.45-test-ondmnd-1536-192.show-p1984 #499
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 2 Nov 2011 at 8:14
Attachments:
All day without reboots with kernel 1.0 on official stripped rom 1.73 xe. But
20 minutes before I see my phone rebooted. Made this logs after enetering pin
and going to homescreen. Play some games and use skype before reboot. Running
your kernel at stock frequency.
Original issue reported on code.google.com by [email protected]
on 29 Sep 2011 at 7:37
Attachments:
What steps will reproduce the problem?
1. Taking Picture with Whatsapp.
2. Taking Picture with normal Camera App
What is the expected output? What do you see instead?
I get a Freeze and when I turn the Display off and want to turn it on again the
Screen stays black. Phone doenst react anymore.
What version of the product are you using? On what operating system?
ARHD 3.6.2
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 19 Oct 2011 at 9:14
Attachments:
What steps will reproduce the problem?
- Sometimes the 3G connection will be lost spontaneously (e.g. after
unlocking the screen or just during browsing). It will reconnect itself again.
What is the expected output? What do you see instead?
- After you wait some time, the device will reconnect to the 3G network.
What version of the product are you using? On what operating system?
- I use insertcoin V3.3.9 in combination with bricked kernel v1.4.
Original issue reported on code.google.com by [email protected]
on 26 Oct 2011 at 1:30
What steps will reproduce the problem?
1.Viber on any Bricked kernels freezes after 10-60 seconds
2.Viber works with Stock kernel
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
InsertCoin 2.2.5 SSE / android 2.3.4 / Bricked kernel v. 04 & v.05
Please provide any additional information below.
I hope the logs provided are Ok ...if not please let me know ...thanks in
advance
Original issue reported on code.google.com by [email protected]
on 13 Sep 2011 at 6:35
Attachments:
Using bricked 1.45 and 1.50 IC 3.41
Error log from system tuner pro. (hopefully it stays attached this time...)
Wondering if this log points to a kernel issue. Sorry I am not sure which
kernel version I was running at the time of the log as I have been switching
back and forth between the two. Also out on the road for a few days, so can't
do a kernel log dump of crashes.
Hope this helps.
Warmly, Marty
Original issue reported on code.google.com by [email protected]
on 7 Nov 2011 at 3:46
Attachments:
Awesome Kernel :)
Original issue reported on code.google.com by [email protected]
on 18 Sep 2011 at 9:17
What steps will reproduce the problem?
I'm not quite sure whether you'll be able to reproduce this. I discovered this
issue accidentally because my K-9 Mail installation was somehow corrupted
(maybe Titanium backup did something wrong). What I did was this:
1. Make sure, the Gallery app (HTC Sense) is set as default for opening image
files
2. Open K-9 mail and locate a mail with image attachments
3. Click on "Open" to open the attachment directly
Since K-9 mail did not work correctly, the Gallery was not able to open the
image (I don't know why, maybe wrong path or corrupt image data). But instead
of showing an error message, the Gallery app and often the whole system froze.
I thought this were an error with K-9 or the Gallery app, but then I went back
to Bricked v0.7 and the Gallery app now showed a warning sign instead of
freezing.
Since reinstalling K-9 mail resolved the last issue, I can't provide you with a
reliable way for reproducing this issue.
What is the expected output? What do you see instead?
System freezes, but it shouldn't (of course)
What version of the product are you using? On what operating system?
v0.86 on InsertCoin 2.5.3
Please provide any additional information below.
No additional information.
Original issue reported on code.google.com by [email protected]
on 19 Sep 2011 at 11:46
What steps will reproduce the problem?
1.Any version 0.8 kernel(s)
2.Screen off (sleep)
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Versions 0.8, 0.851, 0.854, 0.859
Please provide any additional information below.
Only problem found. When the device is awake, flawless performance.
Original issue reported on code.google.com by [email protected]
on 18 Sep 2011 at 5:29
What steps will reproduce the problem?
1. Using the phone as usual
2. No special action required
3.
What is the expected output? What do you see instead?
I'm using the phone with this ROM/Kernel combo since 0.91 is out. I had no
problems at all - till today. During the day I discovered some touchscreen
problems, it was not as responsive as it should be, at one point I couldn't
slide through the homescreens or in apps, it was completly NOT possible. Made a
hot reboot - worked again.
Some minutes ago I installed an update for BusyBox via market, layed the phone
down, screen switched off. Wanted to put screen back on via power button -
nothing happened. Couldn't do anything, also putting it on USB attached to the
laptop made no effect, charging LED didn't switch on and the laptop didn't find
the phone. Pulled the battery out...
When the phone was restarted, I discovered the very unresponsive touchscreen
again, after some time the phone freezed completly, with screen on. But it was
still connected via USB, so I made uname.log and last_kmsg.log, then I had to
pull the battery out. When the phone was back on homescreen, I made uname2.log
and last_kmsg2.log.
Maybe you can find something in those files. Would be great... I didn't have
such problems EVER :(
What version of the product are you using? On what operating system?
InsertCoin 2.2.5 SSE with Bricked 0.91 GPU@320
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 29 Sep 2011 at 4:45
Attachments:
What steps will reproduce the problem?
Happens randomly. Crash at timestamp 15967.683285. Power and vold does not work
but adb was still alive so I could get the dmesg.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
ROM IC 3.4.0, Kernel 1.5
Please provide any additional information below.
Default OC values (192-1152Mhz)
Original issue reported on code.google.com by [email protected]
on 5 Nov 2011 at 2:47
Attachments:
What steps will reproduce the problem?
1.just randomly reboots
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system? Core
Droid2.4 GB2.3.4
kernel version 2.6.35-Bricked-v1.0-ondmnd-1536-192.show-p1894
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 3 Oct 2011 at 11:49
What steps will reproduce the problem?
1.select smart shot
2.
3.
What is the expected output? What do you see instead?
phone takes picture and hangs.
waited for it to save but doesn't.
can't on the screen after screen time out.
have to battery pull.
What version of the product are you using? On what operating system?
ctdroid sensation 1.9.
bricked 1.45 test #427.happens with bricked 1.4 also.camera fix applied for
both.
Please provide any additional information below.
no flash in night mode.
Original issue reported on code.google.com by [email protected]
on 28 Oct 2011 at 8:47
Run 3D app e.g. Dungeon Hunter 2 and Eternity Warriors.
There is a very unstable framerate. I have the feeling that he jumps from 2 to
30+ fps every 2-3 seconds.
I'm using InsertCoin 3.2.0. Bricked Kernel 1.2 Final by default.
No problems with stock kernel.
Original issue reported on code.google.com by [email protected]
on 9 Oct 2011 at 4:20
What steps will reproduce the problem?
1. Using commands to look at cleancache & zram
2.
3.
What is the expected output? What do you see instead?
Expected: Showing some values and no errors.
Instead: At cleancache there are just zeros, at zram there are some error
messages.
What version of the product are you using? On what operating system?
Bricked 1.5 without any system/oc tools on InsertCoin 3.4.1
Please provide any additional information below.
http://pastebin.com/FJ2ZK2Qz
Original issue reported on code.google.com by [email protected]
on 4 Nov 2011 at 10:28
What steps will reproduce the problem?
1.flash bricked 0.1 over cm7 alpha 3
2.
3.
What is the expected output? What do you see instead?
Bluetooth expected to turn on. Bluetooth will not turn on.
What version of the product are you using? On what operating system?
Bricked 0.1 on cm7 alpha 3
Please provide any additional information below.
Same results using faux 0.1.7 over cm7 alpha 3.
Original issue reported on code.google.com by [email protected]
on 20 Sep 2011 at 1:29
What steps will reproduce the problem?
1. Ran Quadrant Standard v1.1.7
2. Selected: Run full benchmark
3. Crashed on 3D graphics
Could not reproduce after restart!
What is the expected output? What do you see instead?
1. Black screen freeze, had to pull battery to restart.
What version of the product are you using? On what operating system?
1. Bricked-v1.35-test-ondmnd-1536-192.show-p1984
2. Android 2.3.4 with Sense 3.0
3. HTC Sensation using InsertCoin 2.2.5 SSE
Original issue reported on code.google.com by [email protected]
on 22 Oct 2011 at 1:17
Attachments:
What steps will reproduce the problem?
1.Viber freezes after a couple with Bricked Kernel 0.86RC1 +IC 2.5.3
2.Viber works fine with Bricked Kernel 0.8_3DFix+ IC 2.5.2
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
InsertCoin 2.5.3 / android 2.3.4 / Bricked kernel v. 0.86RC1
Please provide any additional information below.
Running on IC 2.5.3 with Bricked 0.86 RC1 and Viber starts to crash again
...after 1 min ...after 2 ...if I'm lucky after 5-6 minutes :(
Thanks in advance for your support.
Original issue reported on code.google.com by [email protected]
on 19 Sep 2011 at 3:47
What steps will reproduce the problem?
1. Don't know for sure if it could be reproduced, just wanted to provide logs
2.
3.
What is the expected output? What do you see instead?
Phone settling up as it should be. Phone rebooting while settling up, I came
from recovery after wiping cache/dalvik. The phone was really sluggish and
struggling, everything was very slow (ok, I stressed it with many presses on
home button, but hey, it should be able to handle it). Then the reboot came.
What version of the product are you using? On what operating system?
InsertCoin 3.4.1 with Bricked 1.5. Logs provided.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 4 Nov 2011 at 9:58
Attachments:
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 2 Nov 2011 at 7:06
Attachments:
What steps will reproduce the problem?
1. it is not reproducable constantly !!
2. plug-in USB cable in car
3. choose disk mode
What is the expected output? What do you see instead?
car able to access the USB disk
instead: "not supported" in car display
sometimes its showing the drive correctly
What version of the product are you using? On what operating system?
InsertCoin 2.3.5 with Bricked 0.4
Please provide any additional information below.
kmsg not accessable currently.
kmsg is from yesterday
two files attached:
- one logcat from during testing in car
- one logcat from connection to PC, which is working!
Original issue reported on code.google.com by [email protected]
on 16 Sep 2011 at 7:07
Attachments:
What steps will reproduce the problem?
1. Problem is difficult to reproduce reliably, but it usually involves trying
to power the screen off (or trying to exit back to the home screen) while in
the camera app after having taken at least one picture.
2. Just a theory, but it could also be related to switching orientation, or
trying to exit too quickly while playing a video in youtube. Symptoms for that
hang are very similar as well.
3.
What is the expected output? What do you see instead?
Usually just a complete hang of the display, although buttons respond with
vibration but the screen will not update. Using the power button to turn off/on
results in a black screen until the device is restarted manually.
What version of the product are you using? On what operating system?
Bricked 1.4r1 on Sense 3.5 InsertCoin 3.3.7.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 28 Oct 2011 at 2:54
Attachments:
What steps will reproduce the problem?
1. Using any app which plays music (for me only MortPlayer, don't use any other
player)
What is the expected output? What do you see instead?
I'd like to have louder music on my headphones, for me HTC did set the limit
way too low.
What version of the product are you using? On what operating system?
InsertCoin 2.2.5 SSE with Bricked 0.7 (waiting for 0.9 final)
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 20 Sep 2011 at 5:11
What steps will reproduce the problem?
starting 3d games for example Riptide GP
What is the expected output? What do you see instead?
I receive Force Close
What version of the product are you using? On what operating system?
Insert Coin 2.5.5.1
Please provide any additional information below.
Again 3d problem is there ! when i use 0.8 I dont have any problem but as I
upgrade to 0.86, 0.9, 0.91 ( i tried every version out there :D ) I have the 3d
problem
the worst thing is i want the speed and stability of 9 and the 3d fix of 8 :D
is it possible? can you Help me with this?
thanks in advance
Original issue reported on code.google.com by [email protected]
on 26 Sep 2011 at 8:27
What steps will reproduce the problem?
1. When in browser, after rotating phone from portrait to landscape mode, will
take around 3 seconds for the browser window to rotate into new orientation.
2. When pressing home key whist the browser is in landscape mode, can take up
to five seconds for the sense homescreen to reappear
3.
What is the expected output? What do you see instead?
Expected screen rotation in around 1 second as with stock kernel, with bricked,
can fake 3-4 seconds and causes phone to momentarily pause and become
unresponsive
What version of the product are you using? On what ooperating system?
Insertcoin v3.4.2, bricked v 1.5r1 running stock speeds, (192-1536) mhz,
Please provide any additional information below.
Suspected that it might have been a Rom problem, so installed stock kernel and
screen location lag was gone. Also tried bricked v 1.4r1 with no problems
either.
Original issue reported on code.google.com by [email protected]
on 14 Nov 2011 at 1:20
Using bricked 1.45 and 1.50
IC 3.41
Error log from system tuner pro.
Wondering if this log points to a kernel issue.
Sorry I am not sure which kernel version I was running at the time of the log
as I have been switching back and forth between the two. Also out on the road
for a few days, so can't do a kernel log dump of crashes.
Hope this helps.
Warmly, Marty
Original issue reported on code.google.com by [email protected]
on 6 Nov 2011 at 10:52
What steps will reproduce the problem?
1. View HD movie in Moboplayer
2. Push back hardbutton
3.
What is the expected output? What do you see instead?
GUI of Moboplayer
What version of the product are you using? On what operating system?
Linux localhost 2.6.35.14-Bricked-v1.51-beta2-ondmnd-1536-192.show-p1984 #535
SMP PREEMPT Tue Nov 15 02:26:08 CET 2011 armv7l GNU/Linux
IC 3.4.2
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 15 Nov 2011 at 10:16
Attachments:
What steps will reproduce the problem?
1. Flash 1.5 kernel
2. First full charge after flashing
3.
What is the expected output? What do you see instead?
When receiving a call, the phone is ringing, the bottom buttons are lit but
there is a black screen. Pressing power will end the call but still no screen.
Pressing it after the call is aborted gives back the screen.
What version of the product are you using? On what operating system?
Bricked-v1.5-ondmnd-1536-192.show-p1984.zip @ SENSEaY - XE35 v2.0.0
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 7 Nov 2011 at 11:19
What steps will reproduce the problem?
1. Running Bricked kernel
2. Running stock kernel
3.
What is the expected output? What do you see instead?
Expected output is a real time display of min/max/current cpu crews, listing of
all available freqs, the amount of time spent at each frequency, and percentage
of total time spent at that frequency. Instead there are no historical values
listed, but min/max/current frequencies do show.
What version of the product are you using? On what operating system?
Cpustats .06, Bricked .851, IC 2.5.2.
Please provide any additional information below.
No big deal if you don't have time for this because it is very minor. It was
just a neat little tool for battery freaks like myself. I know it wasnt
written specifically for Sensation, but it did work well on other custom
kernels, including faux's current bunch of sense/aosp releases.
Original issue reported on code.google.com by [email protected]
on 17 Sep 2011 at 8:47
What steps will reproduce the problem?
1.Just try this sample http://www.multiupload.com/FRSQPZUV2C and play it using
HW decoding on Bricked 0.8x and up.
2.
3.
What is the expected output- Smooth playback? What do you see instead - black
screen and furhter lockup?
What version of the product are you using Bricked 0.8x - 1.2? On what operating
system ICS 2.5.5-2 and 3.2?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 3 Oct 2011 at 6:27
What steps will reproduce the problem?
1. Let the phone go into standby
2. Call the cell phone from another phone
3. The phone will ring and the cap buttons light up, but no screen!
What is the expected output? What do you see instead?
Screen should turn on showing you who is calling and allow you to press answer.
What version of the product are you using? On what operating system?
Bricked-v1.45-test-509-ondmnd-1536-192.show-p1984
Andriod 2.3.4 Sense 3.0
Please provide any additional information below.
Easily reproducable. I also have this problem on Test #505.
I flashed back to Test #427 and the problem is gone!
Original issue reported on code.google.com by [email protected]
on 4 Nov 2011 at 1:59
What steps will reproduce the problem?
1. Run Quadrant
2. Phone hangs at start of 2D test.
3. Only battery pull will stop it.
What is the expected output? What do you see instead?
Expect to see Quadrant run. Screen hangs instead.
What version of the product are you using? On what operating system?
1.35 test. Stock cam. No cam fix applied. ROM is Energy Oct-18.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 22 Oct 2011 at 7:37
Attachments:
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.