Want to try live demo? Demo ESP32 is available at http://193.77.159.208/oscilloscope.html. Please be lenient, ESP32 is not primarily intended for WAN.
The first picture has been generated by bouncing of an end switch. ESP32 Oscilloscope performed digitalRead-s after pin has been initialized in INPUT_PULLUP mode. The second picture shows noise coming from poorly regulated power supply. ESP32 Oscilloscope used analogRead-s on an unconnected pin.
ESP32 oscilloscope was first meant to be just a demonstration of the ESP32_web_ftp_telnet_server_template (https://github.com/BojanJurca/Esp32_web_ftp_telnet_server_template) capabilities and is still fully included there, but it seems to be better off on its own. Only functionalities necessary for oscilloscope to work are used:
-
webServer for HTTP and WS requests (oscilloscope uses WebSockets)
-
ftpServer for uploading oscilloscope.html to ESP32
-
Copy all files in this package into Esp32_oscilloscope directory.
-
Open Esp32_oscilloscope.ino with Arduino IDE.
-
Find and change YOUR-STA-SSID to your WiFi SSID and YOUR-STA-PASSWORD to your WiFi password.
-
In your Arduino IDE under Tools|Board make sure you choose "ESP32 Dev Module" or a board allowing partition schemes
-
Oscilloscope uses FAT file system so select one of FATFS partition schemas (Arduino IDE under Tools|Partition Scheme|...)
-
Compile sketch and run it on your ESP32 for the first time. Doing this, ESP32 flash memory will be formatted with FAT file system. WARNING: every information you have stored into ESP32โs flash memory will be lost.
-
FTP to your ESP32 (By using ftp command line utility or Windows explorer. User name and password are not required) and upload the following files into /var/www/html directory:
- android-192-osc.png,
- apple-180-osc.png,
- oscilloscope.html.
C:\esp32_oscilloscope>ftp YOUR-ESP32-IP
Connected to 10.0.0.3.
220-ESP32 FTP server - everyone is allowed to login
User (10.0.0.3:(none)):
331 enter password
Password:
230 logged on, use "/" to refer to your home directory "/"
ftp> put android-192-osc.png /var/www/html/android-192.png
226 /var/www/html/android-192-osc.png transfer complete
ftp> put apple-180-osc.png /var/www/html/apple-180.png
226 /var/www/html/apple-180-osc.png transfer complete
ftp> put oscilloscope.html /var/www/html/oscilloscope.html
226 /var/www/html/oscilloscope.html transfer complete
ftp> ls
200 port ok
150 starting transfer
-r-xr-xrwx 1 owner group 1818 Aug 24 10:47 /var/www/html/android-192-osc.png
-r-xr-xrwx 1 owner group 1596 Aug 24 10:47 /var/www/html/apple-180-osc.png
-r-xr-xrwx 1 owner group 39515 Aug 24 10:47 /var/www/html/oscilloscope.html
226 transfer complete
ftp>
- Open http://YOUR-ESP32-IP/oscilloscope.html with your browser.