machinekoder / bbioconfig Goto Github PK

So im quite new with the BBB, im working on a project whre i need i lot of gpios so im tryintg to edit the provided capes using the graphic tool.
Im running the windows version that gives the following output
test.txt (.bbio)
but every time i run the congi-pin .f test.bbio i get the
debian@beaglebone4:~$ config-pin -f test.bbio
Invalid mode: gpio

im currently running

debian@beaglebone4:~$ dmesg | grep Linux
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.71-ti-r80 (root@b2-am57xx-beagle-x15-2gb) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP PREEMPT Fri Oct 5 23:50:11 UTC 2018
[ 0.625625] media: Linux media interface: v0.10
[ 0.625694] Linux video capture interface: v2.00
[ 0.625858] pps_core: LinuxPPS API ver. 1 registered
[ 0.629455] Advanced Linux Sound Architecture Driver Initialized.
[ 1.279274] usb usb1: Manufacturer: Linux 4.14.71-ti-r80 musb-hcd

this is my uEnv file
#Docs: http://elinux.org/Beagleboard:U-boot_partitioning_layout_2.0

uname_r=4.14.71-ti-r80
#uuid=
#dtb=

###U-Boot Overlays###
###Documentation: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_Overlays
###Master Enable
enable_uboot_overlays=1

###Overide capes with eeprom
#uboot_overlay_addr0=/lib/firmware/.dtbo
#uboot_overlay_addr1=/lib/firmware/.dtbo
#uboot_overlay_addr2=/lib/firmware/.dtbo
#uboot_overlay_addr3=/lib/firmware/.dtbo

###Additional custom capes
#uboot_overlay_addr4=/lib/firmware/.dtbo
#uboot_overlay_addr5=/lib/firmware/.dtbo
#uboot_overlay_addr6=/lib/firmware/.dtbo
#uboot_overlay_addr7=/lib/firmware/.dtbo

###Custom Cape
#dtb_overlay=/lib/firmware/.dtbo

###Disable auto loading of virtual capes (emmc/video/wireless/adc)
#disable_uboot_overlay_emmc=1
disable_uboot_overlay_video=1
#disable_uboot_overlay_audio=1
#disable_uboot_overlay_wireless=1
#disable_uboot_overlay_adc=1

###PRUSS OPTIONS
###pru_rproc (4.4.x-ti kernel)
#uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-4-TI-00A0.dtbo
###pru_rproc (4.14.x-ti kernel)
uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo
###pru_uio (4.4.x-ti, 4.14.x-ti & mainline/bone kernel)
#uboot_overlay_pru=/lib/firmware/AM335X-PRU-UIO-00A0.dtbo

###Cape Universal Enable
enable_uboot_cape_universal=1

###Debug: disable uboot autoload of Cape
#disable_uboot_overlay_addr0=1
#disable_uboot_overlay_addr1=1
#disable_uboot_overlay_addr2=1
#disable_uboot_overlay_addr3=1

###U-Boot fdt tweaks... (60000 = 384KB)
#uboot_fdt_buffer=0x60000
###U-Boot Overlays###

cmdline=coherent_pool=1M net.ifnames=0 quiet

#In the event of edid real failures, uncomment this next line:
#cmdline=coherent_pool=1M net.ifnames=0 quiet video=HDMI-A-1:1024x768@60e

#Use an overlayfs on top of a read-only root filesystem:
#cmdline=coherent_pool=1M net.ifnames=0 quiet overlayroot=tmpfs

##enable Generic eMMC Flasher:
##make sure, these tools are installed: dosfstools rsync
##cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh

#cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh
############################################################

Hello,
i built it on Debian x86_64, but it required some additional qt -libraries.
When building on BBB QQuickItem is needed but apt-file can't find it.
Is build on BBB possible and where to get the needed qt packages ?

Hello!
I have issues using the config-pin -f .bbio command.

My bbio file, generated with the GUI is:
DT-mk-probotix-bb.txt

When I run
sudo /opt/scripts/tools/version.sh
I get

git:/opt/scripts/:[9599f8c47e18db5cdd36ee11355593ecdfe50979]
eeprom:[A335BNLTEIA05116BBBK3FEC]
model:[TI_AM335x_BeagleBone_Black]
dogtag:[Machinekit Debian Image 2019-10-01]
bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot 2019.04-00002-gf15b99f0b6]:[l                                                                                                             ocation: dd MBR]
kernel:[4.19.72-bone-rt-r39]
/boot/uEnv.txt Settings:
uboot_overlay_options:[enable_uboot_overlays=1]
uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-UIO-00A0.dtbo]
uboot_overlay_options:[enable_uboot_cape_universal=1]
pkg check: to individually upgrade run: [sudo apt install --only-upgrade <pkg>]
pkg:[bb-cape-overlays]:[4.4.20190922.0-0rcnee0~stretch+20190922]
pkg:[bb-wl18xx-firmware]:[1.20190227.1-0rcnee0~stretch+20190227]
pkg:[kmod]:[23-2rcnee1~stretch+20171005]
WARNING:pkg:[librobotcontrol]:[NOT_INSTALLED]
pkg:[firmware-ti-connectivity]:[20180825+dfsg-1rcnee1~stretch+20181217]
groups:[machinekit : machinekit adm kmem dialout cdrom floppy audio dip video pl                                                                                                             ugdev users systemd-journal i2c bluetooth netdev gpio pwm eqep remoteproc admin                                                                                                              spi tisdk weston-launch xenomai cloud9ide]
cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/m                                                                                                             mcblk1p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 rng_core.def                                                                                                             ault_quality=100 quiet]
dmesg | grep remote
[    1.110641] remoteproc remoteproc0: wkup_m3 is available
[    1.352669] remoteproc remoteproc0: powering up wkup_m3
[    1.352689] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf,                                                                                                              size 217168
[    1.354761] remoteproc remoteproc0: remote processor wkup_m3 is now up
dmesg | grep pru
dmesg | grep pinctrl-single
[    0.734968] pinctrl-single 44e10800.pinmux: 142 pins, size 568
dmesg | grep gpio-of-helper
[    0.746271] gpio-of-helper ocp:cape-universal: ready
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
END

but when using the conf-pin file, I obtain a Invalid mode: in

I plan to use this BBIO for Machinekit configuration for the Beaglebone Black

thanks in advance

regards,

Sergio Salinas

Tried using this - looks good! but all overlay files block one or more of the pins I need to be able to program.