Comments (11)
Actually, it's not a renode issue, but seems the site holding the elf files can't be reached.
Please provide a way to download the elf files so that people who are interested can see how renode works.
from renode.
It could have been a temporary issue. Could you please verify once again?
Once the binary is downloaded, it is cached - so you have to download them only once on each machine.
If you have your own software for this platform, you can also use it by setting the $bin variable ($bin=@path/to/file.elf
).
from renode.
Probably it was temporary as I can download it without any issue.
from renode.
Hi, PiotrZierhoffer and AntonKrug,
I tried again and it failed again, so I think it may because some internet issues that make it impossible to access that site from where I am, and it may also happen to others.
So, would you please to put the elf files at github too?
from renode.
Would this help?
(unzip it after download)
from renode.
Sure, thank you, AntonKrug.
It would be better if there's a folder for all elf files in renode's source, then no others would ever have such issue again.
from renode.
That's up to the Antmicro guys how they would prefer to structure it. I just wanted to give you something to get you going in the meantime.
from renode.
Hello,
I have similar issue while running the test.sh
to run the sanity tests.
Here is a short list:
-
Should Generate Interrupts On Gpio High Level:
TargetInvocationException: Exception has been thrown by the target of an invocation. KeywordException: Could not execute command 'sysbus LoadELF @http://antmicro.com/projects/renode/riscv-interrupt-blinky-gpio_interrupts-level_high.elf-s_134928-e5184e20f1458b9784c10c48ad8fde0a738cfb65': Failed to download http://antmicro.com/projects/renode/riscv-interrupt-blinky-gpio_interrupts-level_high.elf-s_134928-e5184e20f1458b9784c10c48ad8fde0a738cfb65, see log for details.
-
Should Generate Interrupts On Gpio Low Level:
TargetInvocationException: Exception has been thrown by the target of an invocation. KeywordException: Could not execute command 'sysbus LoadELF @http://antmicro.com/projects/renode/riscv-interrupt-blinky-gpio_interrupts-level_low.elf-s_134928-3d7a09bb3cf434fde9bf9d2c29888ffb11861c0b': Failed to download http://antmicro.com/projects/renode/riscv-interrupt-blinky-gpio_interrupts-level_low.elf-s_134928-3d7a09bb3cf434fde9bf9d2c29888ffb11861c0b, see log for details.
I have setup the same development environment on two different systems(Ubuntu 16.04 LTS).
And in only one of the system I am observing the same failure repeatedly, also I am able to download the binaries on the system browser and command-line.
Maybe the issue is related.
-Ameya
from renode.
@AmeyaVS I would say the system you observed same failure may have internet issue, just like what happened on my system.
from renode.
@zzzh I tried today, somehow it is now working.
The thing is I was able to download the files using the browser or command-line yesterday, when I faced this issue.
from renode.
@AmeyaVS good to know it's working now, the reason of your issue should be in the log.
from renode.
Related Issues (20)
- Support of an ethernet device driver (litex_vexriscv board) for Zephyr
- Updating BME280 I2C sensor value using python script. HOT 1
- Save statefile inside a Hook (it hangs) via python script HOT 3
- Read value from GPIO
- hi i am trying to run gdb for blinky which is using nordic-blinky-zephyr.elf and using nrf52840 board when i am trying gdb not working HOT 1
- Possibility to synchronize simulation time with real time HOT 1
- Feature Request: Ethernet Support for Cortex-A53 Linux in Renode HOT 1
- Documentation: How to add a custom C# peripheral and testing it ? HOT 1
- `InvalidOperationException` is thrown when invoking a method via reflection HOT 2
- wish: rtos awareness for GDB server HOT 2
- How to use buildroot with renode HOT 2
- Failed to Flash from the eMMC in the Icicle Kit Machine in Renode HOT 1
- Bug in Virtqueue implementation HOT 4
- CAN tools (Wireshark, candump, python-can) run directly from host shows invalid CAN ID while using SocketCAN-Bridge feature
- How to connect multiple AXI masters/slaves to a VerilatedPeripheral HOT 3
- STM32F103 (Bluepill) simulation with CAN bus HOT 1
- Support Needed: Add SD Card peripheral when it is connected to a SPI bus
- renode-test cli output shows status of skipped tests as failed
- LTDC add 2 registers (LTDC_SRCR and LTDC_CDSR ) for stm32h7 support
- Attempts to generate repl for Qualcomm Robotics RB5 failing
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from renode.