autorally / autorally Goto Github PK
View Code? Open in Web Editor NEWSoftware for the AutoRally platform
Home Page: http://autorally.github.io
Software for the AutoRally platform
Home Page: http://autorally.github.io
I'm from Nigeria, so I'm trying to set up a simulation for a local autonomous rc car group
I coming up next year.
I'm trying to run autorally uising ros2 and gazebo 9, I was able to build descrption and gazebo package. But when I launch the robot into rviz2 and gazebo, the robots krrps jerking and moving slowly on its own without any commands been sent to joint states topic. Also Whem I send command to joint states topic only the robot in rviz2 receives it but in gazebo it's just jerking and moving.
Any help please
Also comes with updated massages. The current interface to the chassis via the servoInterface nodelet and arduinoOnboard is:
autorally_msgs::safeSpeed
->servoInterface
autorally_msgs::servoCommand
->servoInterface
arduinoOnboard->autorally_msgs::wheelSpeeds
arduinoOnboard->autorally_msgs::servoCommand
RC signals read from receiver
The redesigned interface to the new autorally_chassis nodelet will be:
autorally_msgs::chassisCommand
->autorally_chassis to control actuators
autorally_msgs::runstop
->autorally_chassis for software runstop messages
autorally_chassis->autorally_msgs::chassisState
for chassis state including commanded values, who is commanding each actuator, and feedback from ESC
autorally_chassis->autorally_msgs::wheelSpeeds
autorally_chassis->autorally_msgs::chassisCommand
for RC signals read from receiver
This is a results of a new, more integrated electronics box design and enhanced feedback with the new ESC.
I am trying to setup the ROS Navigation Stack with autorally platform.
I was able to put a laser on the robot in Gazebo and was able to get the laser data in RViz.
The problem is I am not able to get the map. Also, even though robot moves in Gazebo but it is not moving in Rviz. It looks like only its wheels are moving. I tried writing a node to get tf between map and base_link but apparently a new tf tree is being created. Even the static_transform_publisher isn't working for map(worked for hokuyo laser). Can anyone suggest how to setup Navigation Stack?
Also, I am not able to setup WayPoint Controller. How to visualize the waypoints in Rviz?
One more doubt is which is line 93 in autorally_gazebo/launch/autoRallyTrackGazeboSim.launch that I need to comment? Please let me know if you need any other details
Hi,
I've implemented Model Predictive Path Integral (MPPI, Williams et al., 2017) in Python with the OpenAI Gym environment "pendulum" [1]. Perhaps you are interested in referencing this implementation in your readme/docs? I believe sharing this information could help some people looking for MPPI implementations.
It would be greatly appreciated.
When I do not use a joystick and instead attempt to manually set runstopMotionEnabled by publishing to runstop topic with the rqt_publisher or a Python script, I found that chassisState was not being published by the simulator. Instead I get the following warning:
WARNING: no messages received and simulated time is active.
Is /clock being published?
However, when I enable runstopMotionEnabled from the AutoRally OCS and set the control from the Control tab, I can then do a rostopic echo /chassisState successfully. There are no issues when I use the joystick. It seems that the simulator does not publish chassisState unless it receives control decisions.
Hi
I am getting this error
"error: ‘NavState’ in namespace ‘gtsam’ does not name a type
gtsam::NavState optimizedState_;"
I made the gtsam package "required" in the cmakelist so that it build the stateEstimator node as well.
gtsam is installed in the usr/local/lib location
Regards,
Saptarshi
This project looks amazing! I just noticed that your web site build instructions (https://autorally.github.io/build/) has a broken link for the platform build instructions (supposed to be https://github.com/AutoRally/autorally_platform_instructions but perhaps this repo is not public).
Do you plan to publish the platform instructions?
Thank you!
In autorally/autorally_control/include/autorally_control/path_integral/neural_net_model.cut
Lines 245 - 253
, the MatrixXf &state
is passed as a parameter to a function, but it's not used... How come? Thank you!
template<int S_DIM, int C_DIM, int K_DIM, int... layer_args>
void NeuralNetModel<S_DIM, C_DIM, K_DIM, layer_args...>::enforceConstraints(Eigen::MatrixXf &state, Eigen::MatrixXf &control)
{
int i;
for (i = 0; i < CONTROL_DIM; i++){
if (control(i) < control_rngs_[i].x){
control(i) = control_rngs_[i].x;
}
else if (control(i) > control_rngs_[i].y){
control(i) = control_rngs_[i].y;
}
}
}
I'm trying to run the Gazebo simulator after a fresh install and getting a crash every time:
[ WARN] [1518055560.114620641, 0.034000000]: Deprecated syntax, please prepend 'hardware_interface/' to 'EffortJointInterface' within the <hardwareInterface> tag in joint 'right_rear_axle'.
[ INFO] [1518055560.177734688, 0.034000000]: Loaded gazebo_ros_control.
[autorally_platform/spawn_platform-4] process has finished cleanly
log file: /home/kelsey/.ros/log/8d986cc0-0c61-11e8-a754-309c230ef122/autorally_platform-spawn_platform-4*.log
[WARN] [1518055560.347148, 0.034000]: The specified list of shock absorbers is invalid. No shock absorbers will be used.
[WARN] [1518055560.349486, 0.034000]: The specified namespace value is invalid. The default timeout value will be used instead.
Segmentation fault (core dumped)
[autorally_platform/gazebo-2] process has died [pid 20555, exit code 139, cmd /opt/ros/kinetic/lib/gazebo_ros/gzserver -e dart urdf/populated_AR.world /autorally_platform/camera/left:=/left_camera /autorally_platform/camera/right:=/right_camera __name:=gazebo __log:=/home/kelsey/.ros/log/8d986cc0-0c61-11e8-a754-309c230ef122/autorally_platform-gazebo-2.log].
log file: /home/kelsey/.ros/log/8d986cc0-0c61-11e8-a754-309c230ef122/autorally_platform-gazebo-2*.log
Gazebo works fine when launching independently so I don't believe it's a graphics card/driver issue. I believe it happens when starting the gazebo server and might be related to an invalid URDF model.
Ubuntu 16.04
ROS Kinetic
Gazebo 7.9.0
Branch: kinetic-devel
Hi,
I am so exited I can run the platform, this is the first plantform I can run since I start to learn ros. I am trying to implant a pure pursuit tracking controller, it shuold be very simple. But I need some car's parameters. And also, I want to further extend the motion planning to this platform, while it should be a big challenge for me because of my weak knowledge of ros, I will keep trying.
-shan
Hi!
Do you plan to share the MPPI controller code (mppi_controller)? Where can I find the information/theory about it?
I use the kinetic-devel branch. When I compile it in Ubuntu 16.04, there are some compiling errors with respect to CUDA in the autorally_control package.
I got the following error:
/home/gaowei/catkin_ws/src/autorally/autorally_control/include/autorally_control/path_integral/generalized_linear.cut(98): error: a pointer to a bound function may only be used to call the function
/home/gaowei/catkin_ws/src/autorally/autorally_control/include/autorally_control/path_integral/neural_net_model.cut(79): error: a pointer to a bound function may only be used to call the function
/home/gaowei/catkin_ws/src/autorally/autorally_control/include/autorally_control/path_integral/neural_net_model.cut(80): error: a pointer to a bound function may only be used to call the function
/home/gaowei/catkin_ws/src/autorally/autorally_control/include/autorally_control/path_integral/generalized_linear.cut(98): error: a pointer to a bound function may only be used to call the function
Does anyone have any hint on this?
Thanks a lot!
I am running into the following error when running catkin_make
for the autorally
package:
CMake Error at path_integral_bf_generated_path_integral_main.cu.o.Release.cmake:215 (message):
Error generating
/home/nolan/catkin_ws/build/autorally/autorally_control/src/path_integral/CMakeFiles/path_integral_bf.dir//./path_integral_bf_generated_path_integral_main.cu.o
autorally/autorally_control/src/path_integral/CMakeFiles/path_integral_bf.dir/build.make:63: recipe for target 'autorally/autorally_control/src/path_integral/CMakeFiles/path_integral_bf.dir/path_integral_bf_generated_path_integral_main.cu.o' failed
make[2]: *** [autorally/autorally_control/src/path_integral/CMakeFiles/path_integral_bf.dir/path_integral_bf_generated_path_integral_main.cu.o] Error 1
CMakeFiles/Makefile2:7553: recipe for target 'autorally/autorally_control/src/path_integral/CMakeFiles/path_integral_bf.dir/all' failed
make[1]: *** [autorally/autorally_control/src/path_integral/CMakeFiles/path_integral_bf.dir/all] Error 2
make[1]: *** Waiting for unfinished jobs....
CMake Error at path_integral_nn_generated_path_integral_main.cu.o.Release.cmake:215 (message):
Error generating
/home/nolan/catkin_ws/build/autorally/autorally_control/src/path_integral/CMakeFiles/path_integral_nn.dir//./path_integral_nn_generated_path_integral_main.cu.o
autorally/autorally_control/src/path_integral/CMakeFiles/path_integral_nn.dir/build.make:70: recipe for target 'autorally/autorally_control/src/path_integral/CMakeFiles/path_integral_nn.dir/path_integral_nn_generated_path_integral_main.cu.o' failed
make[2]: *** [autorally/autorally_control/src/path_integral/CMakeFiles/path_integral_nn.dir/path_integral_nn_generated_path_integral_main.cu.o] Error 1
make[2]: *** Waiting for unfinished jobs....
CMake Error at path_integral_bf_generated_path_integral_main.cu.o.Release.cmake:215 (message):
Error generating
/home/nolan/catkin_ws/build/autorally/autorally_control/src/path_integral/CMakeFiles/path_integral_bf.dir//./path_integral_bf_generated_path_integral_main.cu.o
autorally/autorally_control/src/path_integral/CMakeFiles/path_integral_nn.dir/build.make:63: recipe for target 'autorally/autorally_control/src/path_integral/CMakeFiles/path_integral_bf.dir/path_integral_bf_generated_path_integral_main.cu.o' failed
make[2]: *** [autorally/autorally_control/src/path_integral/CMakeFiles/path_integral_bf.dir/path_integral_bf_generated_path_integral_main.cu.o] Error 1
CMakeFiles/Makefile2:7634: recipe for target 'autorally/autorally_control/src/path_integral/CMakeFiles/path_integral_nn.dir/all' failed
make[1]: *** [autorally/autorally_control/src/path_integral/CMakeFiles/path_integral_nn.dir/all] Error 2
Makefile:140: recipe for target 'all' failed
make: *** [all] Error 2
This same error appears whether I am in a conda environment (using either cmake 3.5.0 or 3.12.0) or outside of a conda environment (using cmake 3.5.2).
Hello I installed your repo and trying to run the roslaunch autorally_gazebo autoRallyTrackGazeboSim.launch
and this warn appears:
[WARN] [1553860760.215555, 0.000000]: Controller Spawner couldn't find the expected controller_manager ROS interface.
[controller_spawner-6] process has finished cleanly
log file: /home/daniel/.ros/log/03184c32-521a-11e9-af93-1831bf747ba9/controller_spawner-6*.log
[spawn_platform-5] process has finished cleanly
log file: /home/daniel/.ros/log/03184c32-521a-11e9-af93-1831bf747ba9/spawn_platform-5*.log
Do you know how to fix this, because I'm being able to get anything in any simulation to work. thx.
The state estimator node publishes the twist portion of its message in the global reference frame it is creating. It is the convention for odom messages to publish the twist in the child frame. This is not necessarily a bug, just something to consider if not already known.
Hi, i am new to ROS but i did the setup accordingly on a vmware 1404 client.
on the last roslaunch simulation, it was not successful:
... logging to /home/desk/.ros/log/a2cc5d5a-1eaf-11e6-9179-000c29410603/roslaunch-ubuntu-41202.log
Checking log directory for disk usage. This may take awhile.
Press Ctrl-C to interrupt
Done checking log file disk usage. Usage is <1GB.
error loading tag:
file does not exist [/config//servoCommandPriorities.yaml]
XML is
The traceback for the exception was written to the log file
could you please help me with this, thanks.
Would you like to add more error handling for return values from functions like the following?
Hi,
Are there any explanation (paper, post or something else) of using DDP optimization after the MPPI control iteration?
I would be very appreciated for any comments about the advantages and disadvantages of using DDP.
ImageRepublisher should only receive and process images if other nodes have subscribed to its output topic.
Camera frame rate does not match trigger frequency
While the Arduino is triggering at 40 FPS, the cameras are only outputting at 20 FPS. Removing the GPIO cable prevents the camera from returning any images at all, so triggering is working on some level.
I wonder there is any script to generate track_data.txt file for new track?
Hello,
I'm trying to learn the parameters of the car by myself. The inputs, outputs and neural network architecture are exactly the same as it is in the repository and in the paper. The data I have collected is from 60 minutes of various driving in a simulation.
I'm using PyTorch to train the network and get mean total errors between 0.2 to 0.3. When I plug the dynamics in the simulation again, the trajectory planned looks correct, however, the car steers heavily to one side (left) and fails to follow the trajectory. Then it realises it has missed it and just reverses to attempt it again and repeat..
I had some issues getting autorally to build, here is how I got around those issues.
I'm runniung ubuntu 16.04 and using ros kinetic as the README instructs.
libgeographic-dev
Pointgrey got bought by flir and some links broke, so a few dependencies stopped being able to be built: ros-drivers/pointgrey_camera_driver#187
I got around that by installing old snapshot builds for ros-kinetic-flir-camera-driver
, ros-kinetic-pointgrey-camera-driver
, and ros-kinetic-spinnaker-camera-driver
.
While compiling GTSAM I had to add -DGTSAM_USE_SYSTEM_EIGEN=ON
to the cmake command as GTSAM packages it's own version of the Eigen lib.
autorally_core/src/StateEstimator/CMakeLists.txt
asks for /usr/local/lib/libgtsam.so
, while gtsam provided /usr/local/lib/libgtsam.so.4.0.2
and /usr/local/lib/libgtsam.so.4
I changed the CMakeLists.txt to ask for libgtsam.so
and ran sudo ln -s /usr/local/lib/libgtsam.so.4.0.2 /usr/local/lib/libgtsam.so
The StateEstimator CMakeLists.txt also asks for /usr/local/lib/libGeographic.so
, and libgeographic-dev
put it at /usr/lib/x86_64-linux-gnu/libGeographic.so
, so I changed it to ask for libGeographic.so
Diff:
diff --git a/autorally_core/src/StateEstimator/CMakeLists.txt b/autorally_core/src/StateEstimator/CMakeLists.txt
index 40b35ae..4249327 100644
--- a/autorally_core/src/StateEstimator/CMakeLists.txt
+++ b/autorally_core/src/StateEstimator/CMakeLists.txt
@@ -9,7 +9,7 @@ if(GTSAM_FOUND)
include_directories(include ${catkin_INCLUDE_DIRS} "/usr/local/include")
add_executable(StateEstimator StateEstimator.cpp)
- target_link_libraries(StateEstimator ${catkin_LIBRARIES} ${ROS_LIBRARIES} /usr/local/lib/libgtsam.so /usr/local/lib/libGeographic.so ${TBB_LIBRARIES} ar_diagnostics)
+ target_link_libraries(StateEstimator ${catkin_LIBRARIES} ${ROS_LIBRARIES} libgtsam.so libGeographic.so ${TBB_LIBRARIES} ar_diagnostics)
add_dependencies(StateEstimator autorally_msgs_gencpp)
install(TARGETS StateEstimator
This was just an issue with me not knowing how catkin workspaces work, but I think at least some parts of the following would make the Clone or Fork Repositories section of the README more clear:
mkdir -p $HOME/catkin_ws/src
cd $HOME/catkin_ws/src
catkin_init_workspace
cd $HOME/catkin_ws
catkin_make
cd $HOME/catkin_ws/src
git clone https://github.com/AutoRally/imu_3dm_gx4.git
git clone https://github.com/AutoRally/autorally.git
At this point it builds, but I can't test much as gazbebo is has libGL errors and then segfaults.
Verify/fix the transform from the IMU internal navigation frame (published on /imu/filter) to the state estimator navigation frame. This issue may be caused by a poorly calibrated magnetometer inside the IMU, or a problem with the transform. More investigation is needed to determine.
System is not correctly respecting source priorities.
I use Ubuntu 16.04.4 cuda-8.0
usr/include/boost/type_traits/detail/has_binary_operator.hp:50: Parse error at "BOOST_JOIN"
autorally/autorally_core/src/ocs/CMakeFiles/ocs.dir/build.make:88: recipe for target 'autorally/autorally_core/src/ocs/moc_qnode.cxx' failed
make[2]: *** [autorally/autorally_core/src/ocs/moc_qnode.cxx] Error 1
CMakeFiles/Makefile2:5208: recipe for target 'autorally/autorally_core/src/ocs/CMakeFiles/ocs.dir/all' failed
make[1]: *** [autorally/autorally_core/src/ocs/CMakeFiles/ocs.dir/all] Error 2
make[1]: *** 正在等待未完成的任务....
[ 59%] Building CXX object autorally/autorally_core/src/SerialSensorInterface/CMakeFiles/SerialSensorInterface.dir/SerialInterfaceThreaded.cpp.o
[ 59%] Built target driver_base_generate_messages_eus
[ 59%] Building CXX object autorally/autorally_core/src/SerialSensorInterface/CMakeFiles/SerialSensorInterface.dir/SerialCommon.cpp.o
[ 59%] Built target autorally_msgs_generate_messages_eus
[ 60%] Building CXX object imu_3dm_gx4/CMakeFiles/imu_3dm_gx4.dir/src/imu.cpp.o
[ 61%] Linking CXX shared library /home/launchx-mask/catkin_ws/devel/lib/libRingBuffer.so
[ 61%] Built target RingBuffer
[ 62%] Linking CXX shared library /home/launchx-mask/catkin_ws/devel/lib/libSerialSensorInterface.so
[ 62%] Built target SerialSensorInterface
[ 63%] Linking CXX shared library /home/launchx-mask/catkin_ws/devel/lib/libImageRepublisher.so
[ 63%] Linking CXX shared library /home/launchx-mask/catkin_ws/devel/lib/libDiagnostics.so
[ 63%] Built target Diagnostics
[ 63%] Built target ImageRepublisher
[ 63%] Linking CXX executable /home/launchx-mask/catkin_ws/devel/lib/imu_3dm_gx4/imu_3dm_gx4
[ 63%] Built target imu_3dm_gx4
Makefile:138: recipe for target 'all' failed
make: *** [all] Error 2
Invoking "make -j8 -l8" failed
Open issues in 16.04 with kinetic:
packages that must install from source:
before full compilation, compile driver_base with: catkin_make --pkg driver_base
our own nodes that don't compile right now:
Joint controllers for simulation don't seem to work, needs more debugging
opertating procedures
When I try to run the simulator I have the following error: environment variable 'AR_CONFIG_PATH' is not set. I followed the tutorial and ran setupEnvLocal.sh file (it returned me these two errors:
./setupEnvLocal.sh: 9: ./setupEnvLocal.sh: Bad substitution
./setupEnvLocal.sh: 10: ./setupEnvLocal.sh: source: not found)
When I changed the first line from #!/bin/sh to #!/bin/bash I dont have these errors anymore, but still the simulator does not work. Can you help me?
Thank you in Advance
Adrian
Basically followed the installations instructions, but got the following error. Some variables in the .cu files seems not to be defined.
[ 96%] Building NVCC (Device) object autorally/autorally_control/src/path_integral/CMakeFiles/path_integral_bf.dir/path_integral_bf_generated_path_integral_main.cu.o
/home/yf/autorally_ws/src/autorally/autorally_control/src/path_integral/path_integral_main.cu(81): error: identifier "DynamicsModel" is undefined
/home/yf/autorally_ws/src/autorally/autorally_control/src/path_integral/path_integral_main.cu(81): error: identifier "MPPI_NUM_ROLLOUTS__" is undefined
/home/yf/autorally_ws/src/autorally/autorally_control/src/path_integral/path_integral_main.cu(81): error: identifier "BLOCKSIZE_X" is undefined
/home/yf/autorally_ws/src/autorally/autorally_control/src/path_integral/path_integral_main.cu(81): error: identifier "BLOCKSIZE_Y" is undefined
/home/yf/autorally_ws/src/autorally/autorally_control/src/path_integral/path_integral_main.cu(97): error: identifier "DynamicsModel" is undefined
/home/yf/autorally_ws/src/autorally/autorally_control/src/path_integral/path_integral_main.cu(97): error: identifier "model" is undefined
/home/yf/autorally_ws/src/autorally/autorally_control/src/path_integral/path_integral_main.cu(97): error: expected a type specifier
/home/yf/autorally_ws/src/autorally/autorally_control/include/autorally_control/path_integral/mppi_controller.cuh(56): error: name followed by "::" must be a class or namespace name
detected during instantiation of class "autorally_control::MPPIController<DYNAMICS_T, COSTS_T, ROLLOUTS, BDIM_X, BDIM_Y> [with DYNAMICS_T=<error-type>, COSTS_T=autorally_control::MPPICosts, ROLLOUTS=<error-constant>, BDIM_X=<error-constant>, BDIM_Y=<error-constant>]"
/home/yf/autorally_ws/src/autorally/autorally_control/src/path_integral/path_integral_main.cu(103): here
Hi,
I was going through the excel sheet with all components and their prices.
I have a few questions about the parts.
Some of the parts are quite expensive. For example the IMU, GPS and even the chassis.
Were there any considerations given to cheaper options and if so it would help to know why cheaper options were not considered.
Additionally, it is not clear how cameras are being utilised in the control process. Are they used for obstacle avoidance?
If there were not cameras involved, would it be possible eliminate the onboard compute-box and use wireless commands?
I think there is a need to have instructions on how to run the system in Gazebo.
I can run the simulator after installing as per the document, but its not clear on how to launch the rest of the system to run in simulation mode.
I tried to launch the autorally_platform but there are too many dependencies on physical hardware and the simulation does not work.
Is there a simulation tutorial somewhere?
Thanks
Hi, thanks for the open-source code!
It has the following errors after $roslaunch autorally_gazebo autoRallyTrackGazeboSim.launch
Error [Server.cc:345] Unregistered physics engine [dart], the default will be used instead.
Msg Connected to gazebo master @ http://127.0.0.1:11345
Msg Publicized address: 206.87.212.231
Error [Connection.hh:264] Header is empty
Error [Master.cc:124] Master got empty data message from[45889]
Error [Connection.hh:264] Header is empty
Error [Master.cc:124] Master got empty data message from[45889]
Error [Connection.hh:264] Header is empty
Error [Master.cc:124] Master got empty data message from[45889]
Error [Connection.hh:264] Header is empty
Error [Master.cc:124] Master got empty data message from[45889]
Error [Connection.hh:264] Header is empty
Error [Master.cc:124] Master got empty data message from[45889]
Error [Connection.hh:264] Header is empty
Error [Master.cc:124] Master got empty data message from[45889]
Error [Connection.hh:264] Header is empty
Error [Master.cc:124] Master got empty data message from[45889]
Error [Connection.hh:264] Header is empty
Error [Master.cc:124] Master got empty data message from[45889]
with command: roslaunch autorally_gazebo autoRallyTrackGazeboSim.launch
I get the warnings:
xacro: Traditional processing is deprecated. Switch to --inorder processing!
To check for compatibility of your document, use option --check-order.
For more infos, see http://wiki.ros.org/xacro#Processing_Order
[ WARN] [1522162655.208077500, 0.001000000]: Deprecated syntax, please prepend 'hardware_interface/' to 'EffortJointInterface' within the tag in joint 'left_front_shock'.
[ WARN] [1522162655.208968185, 0.001000000]: Deprecated syntax, please prepend 'hardware_interface/' to 'EffortJointInterface' within the tag in joint 'left_steering_joint'.
[ WARN] [1522162655.209475722, 0.001000000]: Deprecated syntax, please prepend 'hardware_interface/' to 'EffortJointInterface' within the tag in joint 'left_front_axle'.
[ WARN] [1522162655.210048559, 0.001000000]: Deprecated syntax, please prepend 'hardware_interface/' to 'EffortJointInterface' within the tag in joint 'right_front_shock'.
[ WARN] [1522162655.210506718, 0.001000000]: Deprecated syntax, please prepend 'hardware_interface/' to 'EffortJointInterface' within the tag in joint 'right_steering_joint'.
[ WARN] [1522162655.210996375, 0.001000000]: Deprecated syntax, please prepend 'hardware_interface/' to 'EffortJointInterface' within the tag in joint 'right_front_axle'.
[ WARN] [1522162655.211465079, 0.001000000]: Deprecated syntax, please prepend 'hardware_interface/' to 'EffortJointInterface' within the tag in joint 'left_rear_shock'.
[ WARN] [1522162655.211928406, 0.001000000]: Deprecated syntax, please prepend 'hardware_interface/' to 'EffortJointInterface' within the tag in joint 'left_rear_axle'.
[ WARN] [1522162655.212379022, 0.001000000]: Deprecated syntax, please prepend 'hardware_interface/' to 'EffortJointInterface' within the tag in joint 'right_rear_shock'.
[ WARN] [1522162655.212832012, 0.001000000]: Deprecated syntax, please prepend 'hardware_interface/' to 'EffortJointInterface' within the tag in joint 'right_rear_axle'.
and a little while after the simulation has been running:
[ WARN] [1522162656.539863898, 1.000000000]: diagnostic_updater: No HW_ID was set. This is probably a bug. Please report it. For devices that do not have a HW_ID, set this value to 'none'. This warning only occurs once all diagnostics are OK so it is okay to wait until the device is open before calling setHardwareID.
So it should be moved from recommended to required.
Hello,
We are trying to setup our AutoRally (platform v1.4) on Ubuntu 18/Melodic, and we are currently running into an issue where the Teensy LC that controls our runstop box cannot communicate with any of our machines running Ubuntu 18. When it is plugged in, it shows up as 'arRunStop' in the /dev/ folder as it should, but the autorally_core RunStop node does not get any messages from it. The Arduino IDE is not able to read its messages from the serial monitor, nor can Cutecom. The Arduino IDE is also not able to upload code to it. However, it works fine on our Ubuntu 16 machines (RunStop node gets messages from it, Arduino Serial Monitor can read its messages, and Arduino IDE can upload code to it).
Do you have any ideas why we might be running into this issue?
Will have to update chronyStatus to use new API
IMG_GPS raises several warnings during compilation regarding unused variables and out-of-order initialization.
where is the code of path_integral_nn
Should it be avoided to check the data structure member "encoding" more than it is required in the functions "QNode::imageCallback1" and "QNode::imageCallback2"?
Autorally Gazebo launch file autoRallyTrackGazeboSim.launch calls for chassisCommandPriorities.yaml on line 89:
<rosparam param="chassisCommandProirities" command="load" file="$(env AR_CONFIG_PATH)/chassisCommandPriorities.yaml" />
However the file doesn't exist. The following error appears in the terminal:
error loading <rosparam> tag: file does not exist [/home/zzz/catkin_ws/src/autorally/autorally_util/config/chassisCommandPriorities.yaml] XML is <rosparam command="load" file="$(env AR_CONFIG_PATH)/chassisCommandPriorities.yaml" param="chassisCommandProirities"/> The traceback for the exception was written to the log file
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.